The acoustic range panels only come in one size, 2800 mm x 520 mm. However, we have designed them to join both widthways and long ways seamlessly, allowing any length or width to be easily achieved.

To obtain a class A sound absorption, then we strongly recommend installing the acoustic wood panels with batons. Though, if you would like to have them solely for decorative purposes while still providing some sound absorption, we recommend screwing the panels directly into the wall through the acoustic felt backing using black or grey screws.

Yes, the panels will have no issues in these areas as long as they are not in direct contact with water.

The AKUSTIK acoustic range is designed for indoor use only. However, we will be launching our outdoor panel range in late 2020.

Yes, there is no issue adjusting the panels to fit around any pre-existing fitting. You can cut the panels widthways, and the acoustic felt lengthways with a sharp blade. They can then be applied around any item you may have on your surface.

The acoustic panel range can be easily installed on any flat surface including brick, concrete and plasterboard walls.

Our wood is always from the same source, so the finish will always look more or less the same. Being natural wood, however, knots, slight cracks and colour variations can occur.

We offer individual slats if you would like to install one to the side of your acoustic panel, hiding the edges.

First, install the panels using batons, then apply mineral wool or other any sound insulation material in-between the gaps; this will significantly increase the sound absorption.

The AKUSTIK acoustic range panels are stocked in Estonia; we can offer the next week or sometimes even same-week delivery.